Fence Line Clearing
We mulch the cedar and brush that grow up along fence lines and property lines. You get an open strip along the wire, ready for repairs or a new fence.
Learn More
Lot clearing opens up a lot that has grown over with brush and small trees. We clear building lots before a house or a barn goes up. We also clear overgrown lots so they can be used again, inside Hillsboro and out in the county. It is the same land clearing around Hillsboro we do on acreage, on a smaller piece of ground.
A skid steer with a forestry mulching head does the work. The mulching head grinds brush and small trees into mulch where they stand. The mulch stays on the lot as a ground cover, and the roots stay in the soil. That is forestry mulching, and it leaves the lot as open, mulched ground ready for the builder's dirt work.
Tell us what needs clearing and where it is. We look at the job and put the quote in writing.
A cleared lot is open ground under a layer of mulch. The brush and small trees are gone, ground into chips where they stood. You can see the whole lot again, down to the low spots and the corners.
From there, the dirt work belongs to the builder or an excavation contractor. They cut the house pad and dig for the utility lines after we finish.
Stumps left from bigger trees can sit right where the slab or the driveway goes. Our stump grinding takes them down to grade or just below it.
Inside Hillsboro city limits, building permits go through the city's Building and Community Services department. Its permit page says all residential and commercial construction needs city permits and inspections. Ask that office what your lot needs before the build starts.
Overgrown lots inside the city have their own rule to watch. Hillsboro's code enforcement page lists tall grass and weeds over 12 inches among its typical code violations. Once the mulcher takes the brush and saplings down, the lot can be mowed again.
Out in the county, Hill County's Development Services office handles septic permits. The county's development permit comes first when a new home site needs a 911 address. If the property has no driveway yet, the county asks you to stake the new one. The mulcher can open a path along that line.
It starts with a call or a text to (817) 937-1506. We look at the lot with you and put the quote in writing. Show us the corners if you know them, and where the house will sit.
Point out any private lines on the property, like a water line out to a barn. Texas 811 gets the utility companies to mark their buried lines, and private lines are yours to show. Texas law asks anyone digging 16 inches or deeper with power equipment to call 811. That call goes in at least two business days before the digging starts.
When we finish, the lot is mulched and ready for the next trade on the job. If the land around the lot has grown up too, our brush clearing work opens it the same way.
Call or text for a written quote. We work about 50 miles around Hillsboro across Hill, McLennan, Ellis, Johnson, Navarro, Bosque and Limestone Counties.
(817) 937-1506From the first call or text to the finished work, here is how it goes.
Call or text (817) 937-1506, or send the form. Tell us where the land is and what has grown up on it.
We come out to see the job in person. The brush, the tree sizes, the ground and the way in all shape the plan.
The quote comes in writing and spells out the work. You decide with it in hand.
We set a start date with you and bring in the mulcher. Brush and small trees go down and turn to mulch right there.
The land is open, and the mulch lies where it fell. If the job includes stump grinding, the stumps get ground down to grade or just below it.
Common questions about lot clearing around Hillsboro and the surrounding counties. If yours is not here, call or text and ask.
We mulch the cedar and brush that grow up along fence lines and property lines. You get an open strip along the wire, ready for repairs or a new fence.
Learn More
We grind stumps to grade or just below it, so you can mow over the spot or build on it. The grindings stay on site for you to use.
Learn More
We grind brush and small trees into mulch where they stand. A skid steer with a forestry mulching head does the work, and the mulch stays on the ground.
Learn MoreThe brush turns to mulch on the spot, so the clearing and the cleanup happen together. What is left is open ground under a layer of mulch.
We look at the job before we price it, then put the quote in writing. You see what the work covers before you decide.
We clear the brush and small trees, and we can grind the stumps left behind. One company takes the land from overgrown to open ground.
Our service area follows the roads that meet at Hillsboro. I-35 runs north and south through it, and TX-22 runs west to Whitney and east to Corsicana.
Tell us the town and what has grown up on the land, and we will look at the job. You can also call or text (817) 937-1506.
Tell us what needs clearing and where it is. We look at the job and put the quote in writing.
